Now you are seeing a pattern  like this.

 Time to get out that card board and cutting them triangles.

Place the card board under the rush. Stack the card board on top of each other, until the gap between the rush and card board is snug.

As you are weaving keep the rush tight on all sides. You can use a screw driver to tap the rush snug.

Now you might be thinking, Hey there is less room on the, left to right than the up and down! This is normal. Keep weaving and soon we will be doing the bridge work.

Its now time to do the figure eight weave.
All you have to do is weave the rush, front front to back. When you are done tack the rush under the seat to the back rail.

Back To Page 1